An HPLC method for the determination of selected amino acids in human embryo culture medium

A method for the determination of selected amino acids in culture medium using HPLC with fluorescence detection is described. Twenty hours after intra‐cytoplasmic sperm injection, one randomly selected zygote was transferred to the culture medium. After incubation (72 h after fertilization), the culture medium in which the embryo was incubated and blank medium was immediately stored at −80°C. Filtered medium samples were derivatized with ortho ‐phthalaldehyde (naphthalene‐2,3‐dicarboxaldehyde), forming highly fluorescent amino acids derivatives. Reverse‐phase columns (LichroCART, Purospher STAR RP_18e or Ascentis Express C₁₈) were used for the separation. The derivatives were analyzed by gradient elution with a mobile phase containing ethanol and sodium dihydrogen phosphate. The analytical performance of this method is satisfactory for all amino acids; the intra‐assay coefficients of variation were <10% and quantitative recoveries were between 95.5 and 104.4%. Changes in the levels of selected amino acids before and after human embryo cultivation were observed. After embryo incubation, the levels of all amino acids in the medium were increased, apart from aspartate and asparagine. After the cultivation of some embryos, amino acids which were not part of the medium were detected. Low amino acids turnover was observed in some embryos.     

LR12‐peptide quantitation in whole blood by RP‐HPLC and intrinsic fluorescence detection: Validation and pharmacokinetic study

A simple, sensitive, selective and robust HPLC method based on intrinsic fluorescence detection was developed for the quantitation of a dodecapeptide (designated as LR12), inhibitor of Triggering Receptor Expressed on Myeloid cells‐1, in rat whole blood. Sample treatment was optimized using protein precipitation and solid‐phase extraction. Chromatographic separation was carried out in a gradient mode using a core–shell C₁₈ column (150 × 4.6 mm, 3.6 μm) with mobile phases of acetonitrile and water containing trifluoroacetic acid at 1.0 mL/min. The method was validated using methodology described by the US Food and Drug Administration guidelines for bioanalytical methods. Linearity was demonstrated within the 50–500 ng/mL range and the lower limit of quantitation was 50 ng/mL. Finally, a preliminary pharmacokinetic study after intraperitoneal injection of LR12 in rats was conducted to evaluate both LR12 monomer and its corresponding disulfide dimer, the main product of degradation. Beyond the fact that this paper describes the first fully validated method for LR12 analysis in blood samples, the approach followed here to optimize pre‐analytical steps could be beneficial to develop HPLC and/or MS methods for other pharmaceutical peptides.     

��λ���ع�Ĺ⻬������Ȼ

For linear quantile regression model, this paper proves that the test statistics, besed on smoothed empirical likelihood (SEL) method and least absolute deviation (LAD) method, both converge weakly to a noncentral Chi-square distribution under the local alternatives $H_1:\beta=\beta_0+a_n$, where $\beta$ is the true parameter. Simulation results show that the SEL method is more efficient than the LAD method.     

Energy harvesting from a magnetic levitation system

Numerical and experimental studies of a magnetic levitation harvester are presented in the paper. The idea is based on the motion of permanent cylinder magnet in a coil exploited for energy harvesting. The novel model is based on a new definition of the coupling coefficient (inductive coefficient) which relates mechanical and an electrical components. The performed static and dynamics experimental tests show that this coefficient is a nonlinear function of the magnet position, and highly depends on the magnet coordinate in the coil, in such a way that the maximum energy is obtained in a coil ends. The comparison between classical – fixed value model – and novel nonlinear model of the inductive coefficient is presented for selected cases. The most essential differences are presented.     

A Photo-Responsive Organogel Based on Pyrene-Substituted Acylhydrazone Derivative

A new simple pyrene-substituted acylhydrazone derivative, 4-(3,4-dioctyloxy) phenyl-1-pyrene acylhydrazone (PAH-8), was designed and synthesized. The PAH-8 can form thermo-reversible organogel in DMSO, and shows gelation-induced enhanced fluorescence emission. Xerogel exhibits ribbon-like fibrous aggregates with widths of 0.5-1 μm. The PAH-8 organogel indicates photo-responsive behaviors due to the trans-cis isomerizations of -C=N- bond upon exposure to visible or UV light. Upon visible light irradiation, the partial trans-cis isomerization of the -C=N- bond causes the fiber morphology to disappear, resulting in gel-sol transition, whereas the PAH-8 organogel exhibits few photoisomerizations from trans to cis transition without breakage of the gel state upon UV light irradiation.     

Efficient computation of operator‐type response sensitivities for uncertainty quantification and predictive modeling: illustrative application to a spent nuclear fuel dissolver model

This work honors the 75th birthday of Professor Ionel Michael Navon by presenting original results highlighting the computational efficiency of the adjoint sensitivity analysis methodology for function‐valued operator responses by means of an illustrative paradigm dissolver model. The dissolver model analyzed in this work has been selected because of its applicability to material separations and its potential role in diversion activities associated with proliferation and international safeguards. This dissolver model comprises eight active compartments in which the 16 time‐dependent nonlinear differential equations modeling the physical and chemical processes comprise 619 scalar and time‐dependent model parameters, related to the model's equation of state and inflow conditions. The most important response for the dissolver model is the time‐dependent nitric acid in the compartment furthest away from the inlet, where measurements are available at 307 time instances over the transient's duration of 10.5 h. The sensitivities to all model parameters of the acid concentrations at each of these instances in time are computed efficiently by applying the adjoint sensitivity analysis methodology for operator‐valued responses. The uncertainties in the model parameters are propagated using the above‐mentioned sensitivities to compute the uncertainties in the computed responses. A predictive modeling formalism is subsequently used to combine the computational results with the experimental information measured in the compartment furthest from the inlet and then predict optimal values and uncertainties throughout the dissolver. This predictive modeling methodology uses the maximum entropy principle to construct an optimal approximation of the unknown a priori distribution for the a priori known mean values and uncertainties characterizing the model parameters and the computed and experimentally measured model responses. This approximate a priori distribution is subsequently combined using Bayes' theorem with the “likelihood” provided by the multi‐physics computational models. Finally, the posterior distribution is evaluated using the saddle‐point method to obtain analytical expressions for the optimally predicted values for the parameters and responses of both multi‐physics models, along with corresponding reduced uncertainties. This work shows that even though the experimental data pertains solely to the compartment furthest from the inlet (where the data were measured), the predictive modeling procedure used herein actually improves the predictions and reduces the predicted uncertainties for the entire dissolver, including the compartment furthest from the measurements, because this predictive modeling methodology combines and transmits information simultaneously over the entire phase‐space, comprising all time steps and spatial locations. Copyright © 2016 John Wiley & Sons, Ltd.     

中美高中化学教科书支撑同一知识的实验设计和内容呈现比较——以“影响化学反应速率的因素”为例

以人教版、苏教版、鲁科版高中化学教科书以及美版教科书中支撑"影响化学反应速率的因素"这一知识内容所涉及的实验内容为研究对象，从实验的设计和内容呈现等方面进行系统地比较，结果表明：国内的教科书中设计的实验探究性更强，对于学生能力的培养更加全面，美国教科书中设计的实验更注重吸引学生的注意力，激发学生的学习兴趣。最后综合分析了不同版本教科书的优缺点，并对实际教学提出一些建议。     

Enzyme‐Mediated,Site‐Specific Protein Coupling Strategies for Surface‐Based Binding Assays

Covalent surface immobilization of proteins for binding assays is typically performed non‐specifically via lysine residues. However, receptors that either have lysines near their binding pockets, or whose presence at the sensor surface is electrostatically disfavoured, can be hard to probe. To overcome these limitations and to improve the homogeneity of surface functionalization, we adapted and optimized three different enzymatic coupling strategies (4′‐phosphopantetheinyl transferase, sortase A, and asparaginyl endopeptidase) for biolayer interferometry surface modification. All of these enzymes can be used to site‐specifically and covalently ligate proteins of interest via short recognition sequences. The enzymes function under mild conditions and thus immobilization does not affect the receptors’ functionality. We successfully employed this enzymatic surface functionalization approach to study the binding kinetics of two different receptor–ligand pairs.     

Biohybrid based on layered terbium hydroxide and applications as drug carrier and biological fluorescence probe

Aspirin (abbr. ASA) is intercalated into the layered terbium hydroxide (LTbH) by anion exchange method. Structure, chemical compositions, thermostability, morphology, luminescence property, cytotoxic effects and controlled‐release behaviors have been investigated. The ASA molecules may embed between layers with monolayered vertical arrangement, and the thermal stability of organics was enhanced after intercalation. The Tb³⁺ luminescence in ASA‐LTbH composites was enhanced compared with LTbH precusor and the luminescence intensity increased with the deprotonation degree. The cytotoxic effect of LTbH was observed with a sulforhodamine B (SRB) colorimetric assay, which revealed that the LTbH showed low cytotoxic effects. In addition, the ASA‐LTbH composites exhibited a sustained release of ASA in Na₂HPO₄‐NaH₂PO₄ buffer solution at pH 6.86 and 37°C. Construction of LRHs composites with drug molecules provided a beneficial pathway for preparing biohybrid based on LRHs, which may have potential applications in drug delivery carrier and biological fluorescence probe.     

Imine‐linked porous organic polymers showing mesoporous microspheres architectures with tunable surface roughness

Different kinds of porous organic polymers (POPs) bearing 4,4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene (BDP) fluorophores have been developed to generate singlet oxygen upon light illumination. Herein, four imine‐linked POPs were prepared by copolymerization of amine and aldehyde with different ratios of di‐aldehyde A1 and A2. The POPs were investigated by a combination of techniques such as solid ¹³C NMR, FTIR, and nitrogen absorption–desorption isotherms and electronic microscopy. The results demonstrated that these POPs were prone to form hierarchical porous architectures. Scanning electron microscopy and transmission electron microscopy images revealed that the spherical morphologies showed different roughness, that is, BDP‐POPs with more BDP aldehyde A2 presented rougher surface. Finally, these POPs were used to generate singlet oxygen (¹O₂) monitored by 1,3‐diphenylisobenzofuran and bioimaging in HeLa cells. Our results indicated that the ability to generate ¹O₂ is dependent on the amount of BDP. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 319–327